Campground Field Utility • 35 Fault Codes • 6 Deep-Dive Guides • 111 RV Brands

RV Blink Code Decoder & Subsystem Repair Hub

Decode Lippert Schwintek slide blinks, Cummins Onan generator codes, Dometic/Norcold refrigerators, Suburban furnaces, Level-Up hydraulics, and rooftop A/C faults in seconds — built to load fast even on a 2-bar campground signal.

AMBER (3-6)
2nd-Level Code Retrieval: While the amber switch blinks 3x (Service Fault), press STOP once to read the 2-digit code (3 blinks, pause, 6 blinks).
CRITICAL • 3 Blinks, pause, 6 Blinks

Code 36 — Engine Stopped Without Command

Most frequent Onan fault: engine died unexpectedly due to fuel, spark, oil level, or air.

Full Diagnostic Guide →
Field Safety Warning: Keep flames and sparks clear when testing fuel flow from the carburetor inlet line.

Checkable Field Troubleshooting Steps

OEM Parts Cross-Reference

Cummins Onan OEM: 149-2311-02
Onan QG 4000 Microlite Electric Fuel Pump
Cross-Ref: E11007 / 149-2311

Resolves Code 36 fuel starvation on KY-series 4000W gasoline generators.

Cummins Onan OEM: 146-0785
Onan QG 4000 Carburetor Assembly (KY Spec J-P)
Cross-Ref: 146-0803 / A041D736

Fixes surging, hunting, and Code 36 stalls from varnished jets.

Cummins Onan OEM: 167-0275
Onan QG 4000 / 5500 Spark Plug (Gap 0.025 in)
Cross-Ref: Champion RS17YX

Fouled plugs frequently trigger Code 36 or Code 45 cranking faults.

Cummins Onan OEM: 122-0836
Onan QG 5500 / 7000 Spin-On Oil Filter
Cross-Ref: 140-3116 Kit

Pair with 15W-40 or 10W-30 oil change every 150 hours to prevent Code 2/36.

In-Depth RV Troubleshooting Field Guides

Browse All 6 Guides →
Power / Generators • 7 min read

Onan Code 36 Playbook

Step-by-step campground troubleshooting for Onan QG generators that crank without starting or die after 3 seconds—covering 2nd-level blink retrieval, fuel cutoff, slip rings, and carb jets.

Read Field Guide →
Appliances • 6 min read

RV Fridge Cooling Guide

Understand ammonia-hydrogen absorption physics, test Dometic/Norcold thermistors with an ice-water cup, diagnose 'no co' and 'no FL' lockouts, and spot cooling-unit fire hazards.

Read Field Guide →
Electrical • 6 min read

30A vs 50A Power Guide

Why 50-amp RV pedestals deliver 3.3x more power than 30-amp pedestals (not 1.6x), how to avoid melting dogbone adapters, safe low-voltage cutoffs, and how A/C soft starters work.

Read Field Guide →
Thermal / LP • 6 min read

RV Furnace & Sail Switch Guide

Trace the exact 12V ignition sequence of Suburban SF/NT and Atwood furnaces: battery voltage thresholds, sail switch lint failures, high-limit switches, and 3-try ignition lockouts.

Read Field Guide →
Leveling • 5 min read

Level-Up Hydraulics Guide

Fix crooked auto-leveling with the exact FRONT 5x / REAR 5x Zero-Point calibration, clear OUT OF STROKE and JACKS DOWN alarms, and check Dexron III reservoir fluid properly.

Read Field Guide →

Why RV Fault Diagnostics Are Organized by Subsystem (Not Just Coach Brand)

Whether you own a Grand Design Fifth Wheel, a Winnebago Class C, a Newmar diesel pusher, or a Keystone travel trailer, North American RV manufacturers build their coaches by assembling standardized electro-mechanical subsystems from a small core of OEM suppliers: Lippert Components (Schwintek slides & Level-Up hydraulics), Cummins Onan (QG generators), Dometic & Norcold (absorption refrigeration), Suburban, Atwood & Furrion (LP furnaces & water heaters), and Coleman-Mach / Dometic / Furrion (rooftop HVAC).

Understanding which subsystem controller is flashing lets you diagnose failures directly at the campground using a basic digital multimeter—checking battery voltage under load, thermistor resistance in ice water, or rotor slip-ring Ohms—before paying for an emergency mobile tech callout. Explore our 111 RV Manufacturer Architecture Directory to see which subsystems are commonly installed in your coach, or use our 30A/50A Shore Power Calculator and Propane Tank Runtime Estimator to prevent common campground power and LP gas shutdowns.