CRITICAL • Continuous Beep + Red LED

Lippert Level-Up Hydraulics: JACKS DOWN Alarm Won't Clear

Pressure switch still senses jacks aren't fully stowed or hall/pressure switch failed.

← Live Decoder
Field Safety Warning: Never shift into Drive until you have visually inspected every jack leg.

Checkable Field Troubleshooting Steps

Most Probable Root Causes

  • One jack stuck 1/2 inch from full retraction
  • Low hydraulic fluid preventing full retract pressure
  • Faulty pressure switch on hydraulic manifold
Deep-Dive Technical Guide
Level-Up Hydraulics Guide

Fix crooked auto-leveling with the exact FRONT 5x / REAR 5x Zero-Point calibration, clear OUT OF STROKE and JACKS DOWN alarms, and check Dexron III reservoir fluid properly.

Read Complete Field Guide →

OEM Replacement Parts & Cross-References

Lippert OEM: 241132
Lippert Level-Up Auto-Leveling Touchpad Control
Cross-Ref: 421484 Touchpad

6-point hydraulic touchpad replacement for unresponsive buttons or comm faults.

Disclosure: As an Amazon Associate and eBay Partner, CodeMyRV earns from qualifying purchases at no additional cost to you. See our Affiliate Disclosure.

Frequently Asked Questions About Level-Up Hydraulics JACKS

What does Level-Up Hydraulics fault JACKS mean?

Pressure switch still senses jacks aren't fully stowed or hall/pressure switch failed.

What are the most common causes of Level-Up Hydraulics JACKS?

One jack stuck 1/2 inch from full retraction; Low hydraulic fluid preventing full retract pressure; Faulty pressure switch on hydraulic manifold.

What safety precautions apply before troubleshooting JACKS?

Never shift into Drive until you have visually inspected every jack leg. Always disconnect 120V shore power and shut off LP gas supply valves before probing live electrical or gas components.

Other Lippert Level-Up Hydraulics Fault Codes