CRITICAL • 1 Blink, pause, 3 Blinks

Cummins Onan QG Generators: Code 13 — Undervoltage Shutdown

Generator AC output dropped below ~100V AC for more than 5 seconds.

← Live Decoder
AMBER (1-3)
2nd-Level Code Retrieval: While the amber switch blinks 3x (Service Fault), press STOP once to read the 2-digit code (1 blinks, pause, 3 blinks).
Field Safety Warning: Disconnect coach battery negative before removing generator end-bell covers.

Checkable Field Troubleshooting Steps

Most Probable Root Causes

  • Overloaded coach (both A/Cs + microwave running simultaneously)
  • Failing voltage regulator (305-0982)
  • Dirty slip rings or worn carbon brushes causing high rotor resistance
Deep-Dive Technical Guide
Onan Code 36 Playbook

Step-by-step campground troubleshooting for Onan QG generators that crank without starting or die after 3 seconds—covering 2nd-level blink retrieval, fuel cutoff, slip rings, and carb jets.

Read Complete Field Guide →

OEM Replacement Parts & Cross-References

Cummins Onan OEM: 305-0982
Onan QG Voltage Regulator Assembly
Cross-Ref: 305-0949

Fixes Code 13 (Undervoltage), Code 14 (Overfrequency), and Code 27 (Sense Loss).

Disclosure: As an Amazon Associate and eBay Partner, CodeMyRV earns from qualifying purchases at no additional cost to you. See our Affiliate Disclosure.

Frequently Asked Questions About Onan Generator 13

What does Onan Generator fault 13 mean?

Generator AC output dropped below ~100V AC for more than 5 seconds.

What are the most common causes of Onan Generator 13?

Overloaded coach (both A/Cs + microwave running simultaneously); Failing voltage regulator (305-0982); Dirty slip rings or worn carbon brushes causing high rotor resistance.

What safety precautions apply before troubleshooting 13?

Disconnect coach battery negative before removing generator end-bell covers. Always disconnect 120V shore power and shut off LP gas supply valves before probing live electrical or gas components.

Other Cummins Onan QG Generators Fault Codes